Russell Performance Hose & Fittings

Russell Performance Products has been the leader in advanced fluid transfer systems for more than 30 years.  They  manufactures a complete line of hoses and fittings for fuel, brake, water, oil and various other systems for automotive, motorcycle and marine applications.

For maximum protection and reliability, more professionals and enthusiasts choose Russell performance hoses and fittings.  Russell offers a complete line of hoses and fittings to provide you the widest range of coverage for all your plumbing needs.

PROFLEX AND PRORACE HOSES
These hoses are constructed with a stainless steel outer braid that resists abrasion and corrosion. Both have a Chlorinated Polyethylene (CPE) synthetic rubber liner with a nylon inner braid that will not collapse under extreme heat, yet is extremely flexible.

Superior ProRace hose has the same features as ProFlex but with a specially formulated CPE synthetic inner liner that is embedded with a partial coverage stainless steel inner braid, then bonded together by a full coverage stainless outer braid for 50% more strength.

PROCLASSIC HOSES
For racers and performance enthusiasts who want high quality plumbing that is lighter and easier to assemble than traditional braided steel hose, Russell ProClassic Hose is the perfect choice.

It features a lightweight nylon fiber outer braid over a durable rubber core with a maximum pressure rating of 350 psi. It is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, or antifreeze.

TWIST-LOK HOSES
For the enthusiast looking for a quality performance hose while wanting to save assembly time and money, Russell Twist-Lok Hose is the way to go.

Easy to assemble, flexible and lightweight, it is ideal for most automotive applications where a stainless steel braided line is not necessary. This hose is pressure rated up to 250 psi – suitable for most fuel and oil systems (not for power steering applications).

POWERFLEX POWER STEERING HOSES
For high pressure power steering lines, PowerFlex Power Steering Hose is the preferred choice.

When used in conjunction with Russell’s PowerFlex hose ends, the end result is a durable and professional hose that resists leaks, providing years of service.

A choice of power steering adapters is available to allow the connection to most pumps, feed, pressure and return lines.

RUSSELL PERFORMANCE HOSE ENDS SPEAK FOR THEMSELVES!

Available in a variety of finishes: Red/blue, Endura, black & black/silver and angles: 45 °, 90°, 120°. and 180°.

CRIMP-ON HOSE ENDS

These ends make custom hose fabrication easy. Simply cut the hose, push together the hose and fitting and crimp! Their lightweight collar design is engineered by size for precise compression ensuring proper end attachment with Russell manual crimper and appropriate crimper die.

Replacement collars are available in the event you want to re-use the hose end on a different assembly. They are available in -4 through -12 sizes and are packaged complete with collar.

Crimper and dies sold separately.

FULL FLOW HOSE ENDS
These ends are made from lightweight aluminum and are completely reusable.

They feature a unique taper design ensuring easy assembly and also offer 37° angled sealing surface which guarantees a positive anti-leak seal.

They accept a wide variety of lightweight aluminum AN style adapter and carburetor fittings.

Lastly, these Russell Fittings are interchangeable with many other manufacturers’ hose ends.

FULL FLOW SWIVEL HOSE ENDS

These ends swivel 360° to maximize hose installation allowing for quick alignment of ends after hose assembly.

The Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. They use mandrel bent tubing for superior flow and are available in three different finishes.

 

POWERFLEX POWER STEERING HOSE ENDS

These ends with Endura finish are available in three different AN sizes (-6, -8 and -10).

These hose ends are suitable for high pressure power steering use and are corrosion resistant .

 

SPECIALTY SWIVEL AND FORGED HOSE ENDS

These ends are the perfect answer for several of your specialty plumbing needs.

The Full Flow Swivel Pipe Thread Hose Ends allows the connection of fuel and oil lines with out any additional adapters simplifying the hose assembly.

When plumbing your dry sump system by utilizing the Full Flow Swivel Dry Sump Hose End the additional adapters are eliminated saving time and money. The Full Flow Forged Swivel Hose Ends are manufactured from a superior strength and durable forged aluminum for the tight and unique tight engine compartment.

STAINLESS STEEL HOSE ENDS

These ends are made of extremely durable 303 stainless steel, precision machined to ensure precise thread engagement and a tight seal.

Russell stainless steel hose ends and fittings provide maximum protection against corrosion and the ultimate in strength and appearance. 303 stainless steel hose ends are the premium choice for all severe-duty applications including marine, street rods and race.

Works well with Russell ProFlex, ProRace or ProClassic hose.

TUBE SEAL HOSE ENDS

These ends are designed to add that finishing hose end appearance with the ease of installation of a hose clamp.

They are available in sizes to fit from 1/4″ vacuum hose to 3/4″ heater hose, and are offered in four choices of colors: red, blue, chrome and black.

TWIST-LOK HOSE ENDS

These ends utilizes Barb Technology.  Constructed of lightweight aluminum and are 40% lighter than conventional hose ends.

Easy to assemble and work with any Russell AN adapter or carburetor fittings.

Available in red/blue anodize.

This entry was posted in Featured, What's New. Bookmark the permalink.