CENTERFORCE TWIN-DISC CLUTCH SYSTEMS

cf-clutch

The DYAD DS (Drive System) multi-disc clutch design has been developed to meet the needs of modern high-end vehicles!

Today’s technology has allowed for engine torque levels up to 1300 ft /lbs and still be driven every day.

dyadDrivers need a clutch that can offer; smooth engagement, quiet operation, light pedal, and high-end holding capacity. The DYAD DS offers that and more!

The definition of DYAD: “dy ad Two units treated as one; a couple; a pair, or combining power of two.”

Features:

    • No complicated setup or adjustments required
    • Fully dampened clutch system developed for vehicles with extreme power levels
    • Patented ball bearing pressure plate
    • Patented multi-disc floating disc and drive disc design
    • Quiet, positive drive floater
    • Smooth engagement and light pedal effort
    • High torque capacity up to 1300 ft/lbs at the flywheel
    • Precision balanced
    • Greater longevity
    • ARP fasteners
    • Excellent driver control
    • Comes preassembled for your convenience
    • Specification card included!

dyad-parts

Following are some DYAD kits available.

Ford Applications:*

P/N 04114805 (’96-’11 Mustang, Mustang II, Mustang Cobra w/10.4″ or 11″ clutch & 1-1/8″-26 spline & 164 flywheel teeth, 8 bolt crank)

P/N 04114810 (’96-’10 Mustang, Mustang II, Mustang Cobra w/10.4″ or 11″ clutch & 1-1/8″-26 spline & 164 flywheel teeth, 6 bolt crank)

P/N 04214805 (’96-’11 Mustang, Mustang II, Mustang Cobra w/10.4″ or 11” clutch & 1-1/16″-10 spline & 164 flywheel teeth, 8 bolt crank)

P/N 04214810 (’96-’10 Mustang, Mustang II, Mustang Cobra w/10.4″ or 11″ clutch & 1-1/16″-10 spline & 164 flywheel teeth, 6 bolt crank)

P/N 04234805 (’11-’11 Mustang, Mustang II, Mustang Cobra w/11″ clutch & 1″-23mm spline & 164 flywheel teeth, 8 bolt crank)

Chevrolet/GMC Applications:*

P/N 04614842 (’97-’11 Camaro, Z-28, Corvette, Firebird, Trans Am, & GTO w/11″, 11.5” or 12″ clutch & 1″-1/8″-26 spline & 168 flywheel teeth)

P/N 04614844 (Crate engines w/12″ clutch & 1″-1/8″-26 spline & 168 flywheel teeth, 8 bolt crank)

*Different combinations of the kit parts enable different DYAD kits to fit the same vehicles.  Please check all the parts to ensure that the kit you order is the one you want.  The above clutch sizes are the original clutch parts while the DYAD kits units are 10.5”.

 

This entry was posted in Featured, What's New. Bookmark the permalink.